Vented Drip Edge: Lamb & Ritchie's newly redesigned Vented Drip Edge will provide a balanced flow of air from soffit to ridge, thereby equalizing temperatures and reducing heat and condensation in the attic. The system also protects the roof line as a starter strip. It is easy to install, saving time and labor by not having to install two separate systems.

With twenty-two larger vents every six inches, Lamb & Ritchie Vented Drip Edge conforms to standard building codes, allowing 9.2 square inches of net free air per linear foot. This is important if using ridge vents in conjunction with the Vented Drip Edge. Less than 9.0 square inches of free air will result in downdrafts instead of proper air flow.

The Vented Drip Edge is constructed of .025 aluminum with a two-inch girth. Strong enough to support a ladder, it will give your roof line years of protection.

Lamb & Ritchie Vented Drip Edge features a unique baffle or counterflashing which prevents the flow of snow and water from reaching the inner walls of the house. For proper air flow, a one-inch opening under the sheathing should be allowed.

Available in White Aluminum, Brown Aluminum, Mill Finish Aluminum, and Copper.

10' lengths -- 200' per carton.

Soffit Vents: Soffit Vents are used in locations exposed to weather thus allowing proper ventilation and less chance of rain and snow getting into the attic.

Lamb & Ritchie has designed a Soffit Vent which will allow the proper amount of air to flow and work in conjunction with a Ridge Vent.

Like the Vented Drip Edge, it has twenty-two 1.7" vents with alternating left and right opening every six inches. It allows 9.2 square inches of Net-Free air per linear foot.

Available in White Aluminum, Brown Aluminum, Mill Finish Aluminum, and Copper.

8' lengths, 50 pieces, 400' per carton.